HP ProLiant DL180se G6 Server, Руководство по техническому обслуживанию и ремонту

Страница: 81 / 147

Removal and replacement procedures 81
To remove the PCI cage:
NOTE: Disconnect all cables connecting an existing expansion board to the system board.
1.
Remove the screw that secures the PCI cage to the rear of the server and loosen the thumbscrews
that secure the PCI cage to the system board.
2.
Lift the PCI cage away from the system board.
Figure 49 Removing the PCI Cage
Installing PCIe riser card
The system supports up to two riser cards at a time. Use only HP supported expansion boards that
meet the following specifications:
•
Compliance
○
PCIe x8 or x16
○
PCI-X
•
Form Factor
○
Full-Height/Full-Length
○
Low-Profile