![background image](http://html.mh-extra.com/html/hp/proliant-dl180se-g6-server/proliant-dl180se-g6-server_maintenance-and-service-manual_164671054.webp)
Removal and replacement procedures 54
To install the optical disk drive:
1.
Slide the optical disk drive into the chassis.
2.
Secure the optical disk drive to the chassis with the two screws.
3.
Connect the SATA and power cables to their corresponding connectors on the optical disk drive.
Figure 12
Installing the Optical disk drive
Hard drives
The drive bays on the front panel can accommodate up to twenty-five 2.5 in. hard drives. You can
install either SAS hard drives or SATA hard drives in the server.
For servers with 4 HDDs, the hard drives installed in the server are labeled from Device 1 to Device 4,
from left to right, when viewed from the front of the server.
Figure 13
Hard Drive Configuration / 4 3.5” HDD Model
Item
Description
1-4
SAS/SATA hard drives 1-4
Содержание ProLiant DL180se G6 Server
