Removal and replacement procedures 68
System board configuration
Processor
HP ProLiant DL180se G6 Server supports quad core processors. If a single processor is installed,
then use socket 1. When two processors are used, the server supports boot functions through the
processor installed in socket 1
.
However, if processor 1 fails, the system cannot boot up, and if
processor 2 fails, the system will be automatically booted from processor 1 and provide a processor
failure message.
The processor socket supports 2P Intel Xeon processor with integrated memory controller.
CAUTION:
It is recommended to use processors of the same speeds or cache sizes to prevent
possible server malfunction.
Figure 33
Processor Locations
Item
Description
1 Processor
1
2 Processor
2
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the heat sink and the
processor to cool before touching them.
NOTE:
Before installing the processor, remove the air baffle.
Содержание ProLiant DL180se G6 Server
