Removal and replacement procedures 42
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING:
To reduce the risk of electric shock, fire, or damage to the equipment, do
not plug telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface is
contacted, the potential for injury exists.
WARNING:
To reduce the risk of injury from a hot component, allow the surface to
cool before touching.
Weight in kg.
Weight in lb.
This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
WARNING:
To reduce the risk of personal injury or damage to the equipment,
observe local occupational health and safety requirements and guidelines for manual
material handling.
These symbols, on power supplies or systems, indicate that the equipment is supplied
by multiple sources of power.
WARNING:
To reduce the risk of injury from electric shock, remove all power cords to
completely disconnect power from the system.
Powering down the server
The server does not completely power down when the power button on the front panel are pressed.
The button toggles between On and Standby. The standby position removes power from most
electronics and the drives, but some internal circuitry remains active. To completely remove all power
from the system, disconnect all power cords from the server.
To power down the server:
1.
Shut down the server as directed by the operating system documentation.
2.
Press the power button to toggle to Standby.
3.
This places the server in standby mode changing the power LED indicator to amber. In this
mode, the main power supply output is disabled. Standby does not completely disable or
remove power from the system.
4.
Disconnect the AC power cord(s) from the power outlet(s) and then from the server.
5.
Be sure that the power LED indicator is turned off and that the fan noise has stopped.
6.
Disconnect all peripheral devices from the server.
Содержание ProLiant DL180se G6 Server
