2
.
Disconnect the fan cable from the system board.
3
.
Turn the system board upside down with the external monitor port toward you.
4
.
Loosen the four Phillips PM2.0×13.0 captive screws
(1)
that secure the fan/heat sink assembly to
the system board.
NOTE:
Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink assembly
from side to side to detach the assembly.
5
.
Remove the fan/heat sink assembly
(2)
.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
assembly
(1)
and
(2)
, and
(3)
, the system board components
(4)
and
(6)
, and the processor
(5)
each
time the fan/heat sink assembly is removed. Thermal pads and thermal paste must be installed on all
surfaces before the fan/heat sink assembly is reinstalled. Thermal pads and thermal paste are included
with all fan/heat sink assembly, system board, and processor spare part kits.
Component replacement procedures 97
Содержание PAVILION DV2500
Страница 1: ...HP Pavilion dv2500 Notebook PC Maintenance and Service Guide ...
Страница 4: ...iv Safety warning notice ...
Страница 145: ...Where used One screw that secures the connector bracket to the computer Silver Phillips PM2 5 5 0 screw 137 ...
Страница 172: ......