18
To do…
Command…
Remarks
6.
Place the local user to the
state of
active
or
blocked
.
state
{
active
|
block
}
Optional.
When created, a local user is in the
active
state by default, and the user can request
network services.
7.
Set the maximum number of
concurrent users of the local
user account.
access-limit
max-user-
number
Optional.
By default, there is no limit to the maximum
number of concurrent users of a local user
account.
This limit is not effective for FTP users.
8.
Configure the
password
control
attributes for
the local user.
Set the
password
aging time.
password-control aging
aging-time
Optional.
By default, the setting for the user group is
used. If there is no such setting for the user
group, the global setting (90 days by
default) is used.
Set the
minimum
password
length.
password-control
length
length
Optional.
By default, the setting for the user group is
used. If there is no such setting for the user
group, the global setting (10 characters by
default) is used.
Configure
the
password
composition
policy.
password-control
composition type-
number
type-number
[
type-length
type- length
]
Optional.
By default, the settings for the user group are
used. If there is no such setting for the user
group, the global settings (both are one by
default) are used.
9.
Configure the binding
attributes for the local user.
bind-attribute
{
call-
number
call-number
[
:
subcall-number
] |
ip
ip-address
|
location
port
slot-number
subslot-number
port-
number
|
mac
mac-
address
|
vlan
vlan-id
}
*
Optional.
By default, no binding attribute is configured
for a local user.
Attribute support:
•
PPP users—
call-number
supported.
•
LAN users—
ip
,
location
,
mac
, and
vlan
supported.
•
Other types of local user—No binding
attribute is supported.
