HP Neoware c50 - Thin Client, Руководство пользователя

Страница: 112 / 228

TeemTalk Connection Configuration
96 Printer Port Settings
If you find a through print results in data being split into lines, each
treated as a separate print job, specify a time in the
Seconds Close
Delay
field (e.g. 5 seconds). This will enable the next line of data to
be sent before the print job is assumed to have finished and therefore
prevents the print job from being closed prematurely. When set to
0 ,
TeemTalk will not start printing until it receives a ‘print end of job’
command from the host. Entering any other number will cause
TeemTalk to print after the specified number of seconds have
elapsed, regardless of whether the ‘print end of job’ command has
been received from the host. If you require the port to be kept open
all the time (to stop the printer resetting) enter
-1 (minus one).
Direct Print Data To
A Network Printer
To direct print data to a printer on the network, select
Use Network
Printer (LPR)
and enter the
LPD Hostname
. Clicking the
Configure
button will display a dialog that enables you to specify various print
settings.
You must specify the
Printer Name
. The
Job Name
and
User Name
entries are optional (the
User Name
will default to root if none is
specified). You can specify how many times the LPR protocol will
attempt to execute the print job before cancelling by setting the num-
ber of
Retries
and the number of seconds delay between each
attempt.