Server Configuration and Utilities
Boot Options
After the auto-configuration process completes, or after the server reboots upon exit
from RBSU, the POST sequence runs, and then the boot option screen is displayed.
This screen is visible for several seconds before the system attempts to boot from a
diskette, CD, or hard drive. During this time, the menu on the screen allows you to
install an operating system or make changes to the server configuration in RBSU.
For more information, refer to the
HP ROM-Based Setup Utility Guide
on the
Documentation CD.
Redundant ROM Support
The server enables you to upgrade or configure the ROM safely with redundant ROM
support. The server has a 2-MB ROM that acts as two separate 1-MB ROMs. In the
standard implementation, one side of the ROM contains the current ROM program
version, while the other side of the ROM contains the backup version.
Safety and Security Benefits
When you flash the system ROM, ROMPaq writes over the backup ROM and saves
the current ROM as a backup, enabling you to switch easily to the existing ROM
version if the new ROM becomes corrupted for any reason. This feature protects the
previous ROM version, even if you experience a power failure while flashing the
ROM.
Access to Redundant ROM Settings
Use ROMPaq utilities to create a backup ROM image before upgrading the
configuration or to restore saved ROM data.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
5-9
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Server Configuration and Utilities.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:26 PM
