Server Configuration and Utilities
•
Erase NVRAM/Boot Space Disk
enables you to reset the configuration settings
to their factory defaults and to erase the boot disk, including the operating
system.
•
•
•
•
•
Set CPU Corrected
is used to indicate that the previously failed processor has
been corrected or replaced.
Wake-On LAN
enables or disables the WOL feature for all NICs in the server.
By default, this setting is
Enabled
.
NMI Debug Button
enables debug functionality when the system has
experienced a software lock-up. By default, this setting is
Enabled
.
Custom POST Message
allows you to input a message that can be viewed
during POST.
Processor Hyper-Threading
allows Intel Hyper-Threading technology to be
enabled or disabled. Processor Hyper-Threading delivers two logical processors
that can execute multiple tasks simultaneously using shared hardware resources
of a single processor. By default, this setting is
Enabled
.
BIOS Serial Console Menu
The
BIOS Serial Console
option allows you to configure the serial port to view
POST error messages and run RBSU remotely through a serial connection to the
server COM port. The server that you are remotely configuring does not require a
keyboard and mouse. For more information about BIOS Serial Console, and a copy
of the
BIOS Serial Console User Guide
, refer to the HP FTP site
(
ftp://ftp.compaq.com/pub/products/servers/management/smartstart/bios-
serialconsole.pdf
).
Utility Language
The
Utility Language
option is used to set the language in which RBSU is displayed.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
5-7
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Server Configuration and Utilities.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:26 PM
