Server Configuration and Utilities
Server Asset Text
The
Server Asset Text
menu customizes the server-specific text, including the
following:
•
•
•
•
•
•
•
•
•
Set Server Information Text
defines reference information for the server, such
as
Server Name
,
Server Asset Tag
,
Server Primary OS
, and
Other Text
.
Set Administrator Information Text
defines reference information for the
server administrator, such as
Admin Name Text
,
Admin Phone Number Text
,
Admin Pager Number Text
, and
Other Text
.
Set Service Contact Text
defines reference information for the service contact
of the server, such as
Service Name Text
,
Service Phone Number Text
,
Service Pager Number Text
, and
Other Text
.
Serial Number
allows you to change the chassis serial number.
Advanced Options Menu
The
Advanced Options
menu enables you to configure advanced options of the
system. The following selections are available on this menu:
MPS Table Mode
is automatically set based on the operating system selected
and is used for interrupt routing. By default, this setting is
Auto Set Table
.
POST Speed Up
quickens POST by disabling the extended power-up memory
test. By default, this setting is
Enabled
.
POST F1 Prompt
configures the server so that when an error is encountered
during the power-up sequence, you must press the
F1
key to proceed (
Enabled
option) or the system pauses 10 seconds before proceeding (
Delayed
option).
The
F1 Prompt
option can also be
Disabled
. By default, this setting is
Delayed
.
Redundant ROM Selection
toggles the server ROM between the current ROM
and the backup ROM.
Erase Non-volatile Memory
resets the non-volatile memory of the server to an
initial, factory state.
5-6
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Server Configuration and Utilities.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:26 PM
