HP Indigo press ws4000 Cluster 1 procedures
proprietary and confidential
CA293-00600, Rev 00
page 161 of 221
The final location of the new parts is shown in Figure 185.
Figure 185 New parts in place—press feed side
Note:
A second person will be needed to assist the operator in installing part 2.
Old part removal
•1. Turn off the press.
•2. Open the press input door (Figure 186).
Figure 186 Press input
•3. Open the guard door (Figure 186).
•4. Remove the ITM hood. To remove the ITM hood, first disengage it using
the retaining latch (Figure 187). Push the ITM hood toward the rear of the
press, lift it up, and remove it from the press (Figure 186).
Part 1
Part 2
Part 3
Part 4
Hose clamp
Guard
Press input
door
ITM hood
