HP Fabric OS 7.1.0, Руководство администратора

Страница: 159 / 666

Fabric OS Administrator’s Guide 159
53-1002745-02
Remote authentication
5
If CHAP authentication is required, then Windows must be configured to store passwords with
reversible encryption. Reverse password encryption is not the default behavior; it must be
enabled.
NOTE
If a user is configured prior to enabling reverse password encryption, then the user’s password
is stored and cannot utilize CHAP. To use CHAP, the password must be reentered after
encryption is enabled. If the password is not re-entered, then CHAP authentication will not work
and the user will be unable to authenticate from the switch.
Alternatives to using CHAP are Password Authentication Protocol (PAP), or PEAP-MSCHAPv2
.
3. Configuring a user
IAS is the Microsoft implementation of a RADIUS server and proxy
.
IAS uses the Windows
native user database to verify user login credentials; it does not list specific users, but instead
lists
user groups . Each user group should be associated with a specific switch role. For
example, you should configure a user group for root, admin, factory, switchAdmin, and user,
and then add any users whose logins you want to associate to the appropriate group.
4. Configuring the server
For more information and instructions on configuring the server, refer to the Microsoft website.
Below is the information you will need to configure the RADIUS server for a Brocade switch. A
client is the device that uses the RADIUS server; in this case, it is the switch.
a. For the Add RADIUS Client window, provide the following:
Client address (IP or DNS) — Enter the IP address of the switch.
Client-Vendor — Select RADIUS Standard.
Shared secret — Provide a password. Shared secret is a password used between the client
device and server to prevent IP address spoofing by unwanted clients. Keep your shared
secret password in a safe place. You will need to enter this password in the switch
configuration.
After clicking Finish, add a new client for all switches on which RADIUS authentication will
be used.
b. In the Internet Authentication Service window, right-click the Remote Access Policies
folder, and then select New Remote Access Policy from the pop-up window.
A remote access policy must be created for each group of Brocade login permissions (root,
admin, factory, switchAdmin, and user) for which you want to use RADIUS. Apply this policy
to the user groups that you already created.
c. In the Vendor-Specific Attribute Information window, enter the vendor code value 1588.
Click the Yes. It conforms radio button, and then click Configure Attribute.
d. In the Configure VSA (RFC compliant) window, enter the following values, and then click
OK.
Vendor-assigned attribute number — Enter the value 1.
Attribute format — Enter String.
Attribute value — Enter the login role (root, admin, switchAdmin, user, and so on) that the
user group must use to log in to the switch.