manualshive.com logo in svg

HP Fabric OS 7.1.0, Руководство администратора

Поделиться
Скачать
HP Fabric OS 7.1.0 Скачать руководство пользователя страница 536

536

Fabric OS Administrator’s Guide

53-1002745-02

Supported platforms for trunking

22

Trunks operate best when the cable length of each trunked link is roughly equal to the length of the 
others in the trunk. For optimal performance, no more than 30 meters

 

difference is recommended. 

Trunks are compatible with both short-wavelength (SWL) and long-wavelength (LWL) fiber-optic 
cables and transceivers.

Trunking is performed according to the Quality of Service (QoS) configuration on the master and the 
slave ports. That is, in a given trunk group, if there are some ports with QoS enabled and some with 
QoS disabled, they form two different trunks, one with QoS enabled and the other with QoS 
disabled. For more information on QoS, refer to 

“QoS zones”

 on page 525.

High Availability support for trunking

Trunking is a High Availability (HA) supported feature. The HA protocol for trunking is as follows:

•

If trunking is disabled prior to the HA failover, it remains disabled after the HA failover.

•

If trunking is enabled prior to the HA failover, it remains enabled after the HA failover.

Supported platforms for trunking

Trunking is supported on the FC ports of all Brocade platforms and blades supported in Fabric OS 
v7.0.0 and later.

EX_Port trunking is supported only on those platforms that support EX_Ports. See 

“Supported 

platforms for FC-FC routing”

 on page 570 for more information.

Requirements for trunk groups

The following requirements apply to all types of trunking:

•

The Trunking license must be installed on every switch that participates in trunking.

•

All of the ports in a trunk group must belong to the same port group.

•

All of the ports in a trunk group must meet the following conditions:

-

They must be running at the same speed.

-

They must be configured for the same distance.

-

They must have the same encryption, compression, QoS, and FEC settings.

•

Trunk groups must be between Brocade switches (or Brocade adapters, in the case of F_Port 
trunking). Brocade trunking is proprietary and is not supported on M-EOS or third-party switches.

•

There must be a direct connection between participating switches.

•

Trunking cannot be done if ports are in ISL R_RDY mode. (You can disable this mode by using 
the portCfgIslMode command.)

•

Trunking is supported only on FC ports. Virtual FC ports (VE_ or VEX_Ports) do not support 
trunking.

Содержание Fabric OS 7.1.0



























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды