HP Fabric OS 7.1.0 Скачать руководство пользователя страница 290

Страница: 290 / 666

290

Fabric OS Administrator’s Guide

53-1002745-02

Enabling Virtual Fabrics mode

A fabric is said to be in

Virtual Fabrics mode

(VF mode) when the Virtual Fabrics feature is enabled.

Before you can use the Virtual Fabrics features, such as logical switch and logical fabric, you must
enable VF mode.

VF mode is enabled by default.

NOTE

When you enable VF mode, the control processors (CPs) are rebooted and all EX_Ports are disabled
after the reboot.

Use the following procedure to enable Virtual Fabrics mode:

1. Connect to the physical chassis and log in using an account with the chassis-role permission.

2. Use the fosConfig command to check whether VF mode is enabled:

fosconfig --show

3. Delete all Admin Domains, as described in

“Deleting all user-defined Admin Domains

non-disruptively”

on page 450.

4. Use the fosConfig command to enable VF mode:

fosconfig --enable vf

5. Enter y at the prompt.

Example

The following example checks whether VF mode is enabled or disabled and then enables it.

switch:admin>

fosconfig --show

FC Routing service:

disabled

iSCSI service:

Service not supported on this Platform

iSNS client service:

Service not supported on this Platform

Virtual Fabric:

disabled

Ethernet Switch Service:

Service not supported on this Platform

switch:admin>

fosconfig --enable vf

WARNING:

This is a disruptive operation that requires a reboot to take

effect.
All EX ports will be disabled upon reboot.
Would you like to continue [Y/N]

VF has been enabled. Your system is being rebooted.

Disabling Virtual Fabrics mode

When you disable VF mode, the following occurs:

•

The CPs are rebooted.

•

If F_Port trunking is enabled on ports in the default switch, the F_Port trunking information is
deleted.

ATTENTION

If you want to use Admin Domains in a fabric, you must first disable VF mode.

Содержание Fabric OS 7.1.0



























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Fabric OS 7.1.0

Отзывы:

Бренды по названию

Популярные бренды

HP Fabric OS 7.1.0, Руководство администратора

Результаты поиска

Содержание Fabric OS 7.1.0

Отзывы:

Бренды по названию

Популярные бренды