HP EX485 - MediaSmart Server - 2 GB RAM, Руководство пользователя, Страница: 244 / 336

HP MediaSmart Server User's Guide
11. Notice that within a few seconds the light-bar for the new hard drive pulsates aqua white
This indicates that the hard drive has been installed, but has not been initialized.
12. Add the drive to the server’s total storage .
Removing an Internal SATA Drive
How to remove a hard drive from an expansion bay in the HP MediaSmart Server.
For information about removing the system drive , see Replacing the system .
Caution
Before removing a drive from an expansion bay, you must remove the drive from the server’s total
storage.
For information about removing a drive from total storage, see Adding and Removing Drives from
Server Storage .
To remove a hard drive from an expansion bay
1. Be sure that the light-bar for the hard drive you want to remove is blinking aqua white .
This indicates that the drive has been properly removed from the server’s total storage.
2. Open the door on the front of the HP MediaSmart Server.
3. On the drive you want to remove, press down the lever to unlock the handle.
4. Lift the handle of the hard-drive tray all the way up.
238