HP Engage One Retail System 143 Скачать руководство пользователя

Страница: 63 / 65

MSR maintenance

To clean the MSR (magnetic strip reader), swipe a standard cleaning card through the MSR a couple of times.

You can order a standard cleaning card online. You can also put a thin oil-free cloth around a credit card.

Shipping preparation

Follow these suggestions when preparing to ship the computer:

Back up the hard drive files. Be sure that the backup media is not exposed to electrical or magnetic

impulses while stored or in transit.

NOTE:

The hard drive locks automatically when the system power is turned off.

Remove and store all removable media.

Turn off the computer and external devices.

Disconnect the power cord from the AC outlet, and then from the computer.

Disconnect the system components and external devices from their power sources, and then from the

computer.

Pack the system components and external devices in their original packing boxes or similar packaging

with sufficient packing material to protect them.

MSR maintenance

Содержание Engage One Retail System 143


































































Результаты поиска

Содержание Engage One Retail System 143

Отзывы:

Похожие инструкции для Engage One Retail System 143

Бренды по названию

Популярные бренды

HP Engage One Retail System 143, Справочник по аппаратуре

Результаты поиска

Содержание Engage One Retail System 143

Отзывы:

Похожие инструкции для Engage One Retail System 143

Бренды по названию

Популярные бренды