HP Engage One Retail System 143 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 65

background image

3

Hardware configurations and upgrades

Tools needed

A Phillips screwdriver can be used for procedures described in this guide.

Warnings and cautions

Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and

warnings in this guide.

WARNING!

To reduce the risk of personal injury from electric shock, hot surfaces, or fire:

Disconnect the power cord from the AC outlet before removing the enclosure. Energized parts are inside.
Allow the internal system components to cool before you touch them.
Replace and secure the enclosure before restoring power to the equipment.
Do not connect telecommunications or telephone connectors to the network interface controller (NIC)

receptacles.
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord in a grounded (earthed) AC outlet that is easily accessible at all times.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may

accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the AC outlet,

grasp the cord by the plug.
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup

and provides guidelines for posture and work habits that increase your comfort and decrease your risk of

injury. It also provides electrical and mechanical safety information. This guide is located on the web at

http://www.hp.com/ergo

.

IMPORTANT:

Static electricity can damage the electrical components of the computer or optional

equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly

touching a grounded metal object. See

Electrostatic discharge on page 53

for more information.

When the computer is plugged into an AC power source, voltage is always applied to the system board. You

must disconnect the power cord from the power source before opening the computer to prevent damage to

internal components.

16

Chapter 3 Hardware configurations and upgrades

«
...
22
23
24
25
26
...
»

Содержание Engage One Retail System 143


































































Отзывы:

Нет отзывов

Похожие инструкции для Engage One Retail System 143

Бренд: D-Link Страницы: 29

DGS-3700 Series

Бренд: D-Link Страницы: 292

Бренд: D-Link Страницы: 140

DGS-1224T - Web Smart Switch

Бренд: D-Link Страницы: 61

DI-LB604 - Load Balancing Router

Бренд: D-Link Страницы: 14

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 45

Бренд: D-Link Страницы: 218

DES-3528 - xStack Switch - Stackable

Бренд: D-Link Страницы: 322

DIR-130 - Broadband VPN Router

Бренд: D-Link Страницы: 10

DIR-130 - Broadband VPN Router

Бренд: D-Link Страницы: 4

DIR-130 - Broadband VPN Router

Бренд: D-Link Страницы: 13

Бренд: D-Link Страницы: 13

DI-804HV - Express ENwork Router

Бренд: D-Link Страницы: 19

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 8

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды