Mounting the Engage One to a counter top
You can use an optional counter top mounting bracket to mount the computer head unit and column to a
counter top.
NOTE:
The mounting bracket requires an 80 mm hole in the counter top. The thickness of the counter top
must be 10 mm to 50 mm.
1.
If the stand’s base is attached to the column, remove the screw on the underside of the column (1), and
then remove the base from the column (2).
2.
Route the cable(s) through the routing hole on the top piece of the mounting bracket (1) and attach the
cable(s) to the bottom of the column (2).
NOTE:
If the column has a printer, there are four cables to connect. If it does not have a printer, there is
one cable to connect.
Mounting the Engage One to a counter top
27
Содержание Engage One Retail System 143
Страница 4: ...iv About This Guide ...
Страница 8: ...viii ...
