HP Engage One Retail System 143 Скачать руководство пользователя страница 15

Страница: 15 / 65

Locating the Engage One power button

The computer power button is located on the bottom right edge of the bezel.

Locating the I/O connectivity base power button

The I/O connectivity base power button is located on the underside of the I/O connectivity base.

The head unit controls the I/O connectivity base. When the head unit is turned off, the I/O connectivity base is

turned off and power is not available from the I/O connectivity base ports. The exception is the I/O

connectivity base’s USB Type-C port that connects to the head unit. That port will remain powered so that it

can continue to communicate with the head unit and allow the I/O connectivity base to turn back on when the

head unit is turned on.
After the system has been turned off, you can press the power button on the underside of the I/O connectivity

base to allow power to be available on the I/O connectivity base ports while the head unit remains turned off.

Locating the Engage One power button

Содержание Engage One Retail System 143


































































Результаты поиска

Содержание Engage One Retail System 143

Отзывы:

Похожие инструкции для Engage One Retail System 143

Бренды по названию

Популярные бренды

HP Engage One Retail System 143, Справочник по аппаратуре

Результаты поиска

Содержание Engage One Retail System 143

Отзывы:

Похожие инструкции для Engage One Retail System 143

Бренды по названию

Популярные бренды