HP e-pc s10, Руководство пользователя

Страница: 35 / 64

Audio (sound) problems
27
Audio (sound) problems
No Sound When Running Applications
Have you checked that...
How
The volume, mute, and balance settings are
correct • Right-click on the speaker icon on the taskbar, then
select O
O O
Oppppeeeen
n n
n V
VV
Voooolllluuuum
m m
me
e e
e C
CC
Coooonnnntr
tr tr
troooollll and adjust the settings
if required
• Refer to the operating system documentation for
more information
Advanced Troubleshooting
Have you checked that... How
The problem is not caused by a hardware
conflict. Hardware conflicts occur when two
or more peripheral devices compete for the
same signal lines or channels. Conflicts
between your audio interface and a
peripheral device might be due to the settings
of the I/O addresses, IRQ or DMA channel. Check the settings of the audio interface and other
accessories in your system.
There is a humming noise
Have you checked that... How
The power grounding of your audio
components is adequate Plug all devices into adjacent power outlets (outlets
within 5 cm / 2 inches of each other), or use line
filters
No sound when playing a multimedia or audio CD
Have you checked that... How
If you are using headphones or speakers:
• they are correctly connected
• the operating system volume controls are
correctly set.
• Refer to page 2 for information on connecting
speakers and headphones
• Double-click on the speaker icon on the taskbar,
then set the required volume with the volume
slider