Warning and caution messages
WARNING!
To reduce the risk of personal injury or damage to equipment, heed all warnings
and cautions throughout the installation instructions.
WARNING!
To reduce the risk of personal injury or damage to the equipment, be sure that:
•
The leveling jacks are extended to the floor.
•
The full weight of the rack rests on the leveling jacks.
•
The racks are coupled together in multiple-rack installations.
•
Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any reason.
WARNING!
To reduce the risk of personal injury or equipment damage when unloading a rack:
•
At least two people are needed to safely unload the rack from the pallet. An empty 42U rack
can weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and might
become unstable when being moved on its casters.
•
Never stand in front of the rack when it is rolling down the ramp from the pallet. Always
handle the rack from both sides.
WARNING!
The enclosure is very heavy. To reduce the risk of personal injury or damage to
the equipment:
•
Observe local occupational health and safety requirements and guidelines for manual material
handling.
•
Remove all hard drives before installing or moving the enclosures.
•
Use caution and get help to lift and stabilize enclosures during installation or removal,
especially when the enclosure is not fastened to the rack.
•
Never stack an enclosure on top of another enclosure.
•
Never place equipment on top of an enclosure.
•
Never place an enclosure on a surface that cannot support up to 163.3 kg (360.0 lb).
WARNING!
To reduce the risk of personal injury or damage to the equipment, you must
adequately support enclosures during installation and removal.
WARNING!
Always use at least two people to lift an enclosure into the rack. If the enclosure
is being loaded into the rack above chest level, a third person must assist with aligning the
enclosure with the rails while the other two people support the weight of the enclosure.
WARNING!
Be sure to install enclosures starting from the bottom of the rack and work your
way up the rack.
WARNING!
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
WARNING!
To reduce the risk of electric shock or damage to the equipment:
•
Never reach inside the chassis while the system is connected to a power source.
•
Perform service on system components only as instructed in the user documentation.
WARNING!
A risk of electric shock from high leakage current exists. Before connecting the
AC supply to the power enclosures, be sure that the electrical outlets are properly grounded
(earthed).
Safety precautions
9
Содержание D3600
Страница 8: ...8 Removal and replacement procedures ...
Страница 40: ...4 Component identification 40 Component identification ...