HP Compaq t1010, Дополнительное руководство, Страница: 305 / 320

Glossary
309
Modem (Mo)dulator/(dem)odulator. Data communication equipment
(DCE) devices that provide connections for computers into the
public switched telephone network (PSTN). They convert
(modulate) the digital signals of computers into analog signals
that can be transmitted over telephone lines. A modem at the
other end of the link then demodulates the signals back to digital
bits.
Modular terminal Desktop client that works with existing standard monitors.
Network An interconnected group of nodes; a series of points, nodes, or
stations connected by communications channels; the assembly
of equipment through which connections are made between
data stations.
Null modem A cable, typically an RS-232 cable, for connecting serial ports
on two computers directly, rather than via modems. Since,
according to the specification, both computers should transmit
on pin three of their RS-232 connectors and receive on pin two,
a null modem cable needs to connect one computer's pin two to
the other's pin three and vice versa. It also needs to have male
connectors at both ends (again, according to the specification).
OSD On Screen Display. A menu that displays on your monitor.
Packet A group of bits (including data and call control signals)
transmitted as an identifiable unit on a packet-switched network
(PSN).
PAP Password Authentication Protocol. An authentication scheme
used by PPP servers to validate the identity of the originator of
the connection. PAP applies a two-way handshaking procedure.
After the link is established the originator sends an id-password
pair to the server. If authentication succeeds the server sends
back an acknowledgment; otherwise it either terminates the
connection or gives the originator another chance.
Parallel port An input/output port that allows the entire bit pattern for a single
character to be sent at one time, usually used to connect a
printer to a computer.
Parity check The addition of non-information bits (specifically, parity bits) to
make up a transmission block (a number of bits transmitted as
unit) that ensures the total number of ones is always either even
(even parity) or odd (odd parity). The parity check is used to
detect transmission errors.