HP Compaq Presario,Presario 1910, Руководство пользователя

Страница: 526 / 578

513
Table 153 Configuration items
Item Description
WRR
Setup
WRR
Enable or disable the WRR queue scheduling mechanism on selected ports. The
following options are available:
•
Enable —Enables WRR on selected ports.
•
Not Set —Restores the default queuing algorithm on selected ports.
Queue
Select the queue to be configured.
A queue ID is in the range of 0 to 3.
Group
Specify the group the current queue is to be assigned to.
This list is available after you select a queue ID. The following groups are
available for selection:
•
SP —Assigns a queue to the SP group.
•
1 —Assigns a queue to WRR group 1.
•
2 —Assigns a queue to WRR group 2.
Weight
Set a weight for the current queue.
This list is available when group 1 or group 2 is selected.
Please select port(s) Click to select ports to be configured with queuing on the chassis front panel.
Configuring GTS on a port
1. Select QoS > GTS from the navigation tree.
2. Click the Setup tab to enter the GTS configuration page.
Figure 491 Configuring GTS on a port
3. Configure GTS on a port as described in Table 154 .
4. Click Apply .
Table 154 Configuration items
Item Description
GTS Enable or disable GTS on the port.