manualshive.com logo in svg

HP Compaq Presario,Presario 1910, Руководство пользователя

Поделиться
Скачать
HP Compaq Presario,Presario 1910 Скачать руководство пользователя страница 337

 

324 

Table 94

 

Configuration items 

Item Description 

DHCP Service 

Enable or disable global DHCP. 

Unauthorized Server 
Detect 

Enable or disable unauthorized DHCP server detection. 
There are unauthorized DHCP servers on networks, which reply DHCP clients with 
wrong IP addresses. 
With this feature enabled, upon receiving a DHCP request, the DHCP relay agent will 

record the IP address of any DHCP server that assigned an IP address to the DHCP 
client and the receiving interface. The administrator can use this information to check 

out DHCP unauthorized servers. The device puts a record once for each DHCP 

server. The administrator needs to find unauthorized DHCP servers from the log 
information. After the information of recorded DHCP servers is cleared, the relay 

agent will re-record server information following this mechanism. 

Dynamic Bindings 
Refresh 

Enable or disable periodic refresh of dynamic client entries, and set the refresh 
interval. 
A DHCP client sends a DHCP-RELEASE unicast message to the DHCP server through 

the DHCP relay agent to relinquish its IP address. In this case the DHCP relay agent 
simply conveys the message to the DHCP server, thus it does not remove the IP 

address from dynamic client entries. To solve this problem, the periodic refresh of 

dynamic client entries feature is introduced. 
With this feature, the DHCP relay agent uses the IP address of a client and the MAC 

address of the DHCP relay agent interface to periodically send a DHCP-REQUEST 
message to the DHCP server. 

•

 

If the server returns a DHCP-ACK message or does not return any message within 

a specified interval, which means that the IP address is assignable now, the DHCP 
relay agent will age out the client entry. 

•

 

If the server returns a DHCP-NAK message, which means the IP address is still in 
use, the relay agent will not age it out. 

Note that if the 

Auto

 option is selected, the refresh interval is calculated by the relay 

agent according to the number of client entries. 

Track Timer Interval 

 

Creating a DHCP server group 

1.

 

Select 

Network

 > 

DHCP

 from the navigation tree to enter the 

DHCP Relay

 page shown in 

Figure 

289

. 

2.

 

In the 

Server Group

 area, click 

Add

 to enter the server group configuration page. 

Figure 290

 

Creating a server group 

 

 

3.

 

Configure the DHCP server group as described in

 Table 95.

 

Содержание Compaq Presario,Presario 1910



































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды