HP Compaq Presario,Presario 1910, Руководство пользователя

Страница: 209 / 578

196
Device Comparison process
Configuration BPDU on
ports after comparison
After comparison:
•
The configuration BPDU of CP1 is elected as the optimum
configuration BPDU, so CP1 is identified as the root port, the
configuration BPDUs of which will not be changed.
•
Device C compares the calculated designated port
configuration BPDU {0, 10, 2, CP2} with the configuration
BPDU of CP2, and CP2 becomes the designated port, and
the configuration BPDU of this port will be replaced with the
calculated configuration BPDU.
•
Root port CP1:
{0, 0, 0, AP2}
•
Designated port CP2:
{0, 10, 2, CP2}
•
Then, port CP2 receives the updated configuration BPDU of
Device B {0, 5, 1, BP2}. Because the received configuration
BPDU is superior to its own configuration BPDU, Device C
launches a BPDU update process.
•
At the same time, port CP1 receives periodic configuration
BPDUs from Device A. Device C does not launch an update
process after comparison.
•
CP1: {0, 0, 0, AP2}
•
CP2: {0, 5, 1, BP2}
After comparison:
•
Because the root path cost of CP2 (9) (root path cost of the
BPDU (5) plus path cost corresponding to CP2 (4)) is smaller
than the root path cost of CP1 (10) (root path cost of the
BPDU (0) + path cost corresponding to CP2 (10)), the BPDU
of CP2 is elected as the optimum BPDU, and CP2 is elected
as the root port, the messages of which will not be changed.
•
After comparison between the configuration BPDU of CP1
and the calculated designated port configuration BPDU,
port CP1 is blocked, with the configuration BPDU of the port
unchanged, and the port will not receive data from Device A
until a spanning tree calculation process is triggered by a
new event, for example, the link from Device B to Device C
going down.
•
Blocked port CP2:
{0, 0, 0, AP2}
•
Root port CP2:
{0, 5, 1, BP2}
After the comparison processes described in Table 57 , a spanning tree with Device A as the root bridge
is established, and the topology is as shown in Figure 180 .
Figure 180 The final calculated spanning tree