![HP Compaq Presario,Presario 1910 Скачать руководство пользователя страница 240](http://html.mh-extra.com/html/hp/compaq-presario-presario-1910/compaq-presario-presario-1910_user-manual_161851240.webp)
227
a.
Enter link aggregation interface ID
1
.
b.
Select the
Static (LACP Disabled)
option for the aggregate interface type.
c.
Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
chassis front panel.
4.
Click
Apply
.
Figure 199
Creating static link aggregation group 1
Method 2: Create dynamic link aggregation group 1
1.
From the navigation tree, select
Network
>
Link Aggregation
.
2.
Click
Create
to enter the page as shown in
Figure 200
.
3.
Configure dynamic aggregation group 1:
a.
Enter link aggregation interface ID
1
.
b.
Select the
Dynamic (LACP Enabled)
option for aggregate interface type.
c.
Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
chassis front panel.
4.
Click
Apply
.
Содержание Compaq Presario,Presario 1910
