143
6.
Configure a target host SNMP traps:
a.
Click
Add
on the
Trap
tab page.
The page for adding a target host of SNMP traps appears.
b.
Type
1.1.1.2
in the following field, type
user1
in the
Security Name
field, select
v3
from the
Security Model
list, and select
Auth/Priv
from the
Security Level
list.
c.
Click
Apply
.
Figure 134
Adding a trap target host
Configuring the NMS
To avoid communication failures, make sure the NMS use the same SNMP settings as the agent.
To configure the NMS:
1.
Specify the SNMP version for the NMS as v3.
2.
Create an SNMP user
user1
.
3.
Enable both authentication and privacy functions
4.
Use MD5 for authentication and DES56 for encryption.
5.
Set the authentication key to
authkey
and the privacy key to
prikey
.
For information about configuring the NMS, see the NMS manual.
Verifying the configuration
After the above configuration, the NMS can establish an SNMP connection with the agent and query
and reconfigure values of objects in the agent MIB.
Disable or enable an idle interface on the agent, and you can see the interface state change traps on the
NMS.
Содержание Compaq Presario,Presario 1910
