HP Brio 8300, Онлайн-руководство

Страница: 67 / 86

67
Appendix AT Commands
Basic AT Commands
ATD
n
Tells the modem to go online and dial (automatic dialing). The following characters are authorized as
parameters in the dialing sequence:
0 to 9 - For the telephone numbers.
P - For pulse dialing.
T - For touch tone dialing.
W -
Tells modem to wait until it hears the line free signal (for use with branch exchanges).
S=n -
Dials the number stored in register
n (where n is a number from 0 to 3).
! -
Calls exchange by flash.
^ -
Switches off calling tone (during current dialing process).
;H -
Terminates the dialing sequence and causes the modem to go offline after dialing so that you can
conduct a normal voice conversation. Example: ATDT123456;H.
, -
Pauses the register (S8) time.
@ -
Waits for 5 seconds of silence.
; -
Stays in Command Mode after dialing.
ATE
n
Controls the Echo function, where
n is either 0 or 1:
1 -
Enables character echo so that modem commands appear on screen as they are entered.
0 - Disables the echo function.
ATH
n
Where
n is either 0 or 1:
0 - Forces modem on-hook.
1 - Forces modem off-hook.
Command Description