49
3 Upgrading and Adding Accessories
Upgrading Hardware
Setting the System
Board for the Processor
Type
Set the system board configuration jumpers (or jumper block).
The following diagram shows the location on the system board of the jumpers used to configure the computer for the
new processor. If you are in any doubt as to whether you should change jumper settings or not, contact your reseller.
CPU
Clock Ratio (J23):
Completing the
Installation
1
Replace the airflow guide covering the processor. Verify that the Fan cable is still connected to the Fan Chassis
Connector on the system board.
2
Install any other accessories before returning the computer to the upright position, replacing the cover, and
reconnecting the power cords and any telecommunications cables.
3
Turn on the display and computer. The computer should recognize the new processor.
CPU SPEED
CPUCLK
Ratio
Jumper Position
233 MHz
2 / 7
1-2 and 9-10
266 MHz
1 / 4
5-6, 7-8 and 9-10
300 MHz
2 / 9
5-6 and 9-10
333 MHz
1 / 5
7-8 and 9-10
1
2
9
10
J23
Sample configuration
jumper setting for a
233 MHz processor (if no
jumper block is used)
System Board
Fan Chassis Connector
Note
If your computer is supplied with a jumper block, you will need to change this with individual jumpers when you
upgrade the processor.
Содержание Brio 8300
