HP Brio 8300, Онлайн-руководство

Страница: 42 / 86

42
3 Upgrading and Adding Accessories
Upgrading Hardware
Installing Main Memory Modules
1 Remove the computer’s cover (refer to “Removing the Cover” on page 39 ).
2 On a table top turn the computer on to its side, with the system board closest to the surface of the table top.
3 Handle the memory module by its edges. Slide the memory module into the connector at 90
o
to the system board (the
module will only fit into the socket one way round).
4 Firmly press the memory module completely into the connector until the retaining clips click into position.
5 If you need to remove a memory module, perhaps because you are replacing an existing module, refer to “Removing a
Memory Module” below.
Caution
Static electricity can damage electronic components. Turn off all equipment. Don’t let your clothes touch the
accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing
the accessory from the bag. Handle the accessory as little as possible and with care.
❸
System Board
Retaining Clips
❹
System Board*
*The processor on this system board may differ from the one shown