manualshive.com logo in svg

HP 9000 V-Class, Руководство оператора

Поделиться
Скачать
HP 9000 V-Class Скачать руководство пользователя страница 56

42

Chapter 4

Firmware (OBP and PDC)

Boot sequence

Boot sequence

Once a machine powers on, the firmware controls the system until the
operating system (OS) executes. If the system encounters an error any
time during the boot process, it stops processing and goes to HP mode
boot menu. See “HP mode boot menu” on page 46 for more information.

When the operator powers on or resets the machine, the following
process occurs:

1. Power-On Self Test (POST) runs. POST is described in the HP

Diagnostics Guide: S-Class, X-Class, and V-Class Servers.

2. OBP probes all the devices.

3. OBP loads SPP_PDC in RAM.

4. OBP starts the HP-UX loader, which in turns calls SPP_PDC to set

up CPU’s, memory, and I/O devices in a way that HP-UX
understands.

5. The next action depends on whether Autoboot is enabled.

1. If autoboot is enabled, the operating system boots unless the user

presses a key within 10 seconds.

2. If autoboot is disabled or if the user presses a key within 10

seconds, the boot menu is displayed.

Figure 11 on page 43 illustrates the initialization and start-up process.

Содержание 9000 V-Class





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды