manualshive.com logo in svg

HP 9000 V-Class, Руководство оператора

Поделиться
Скачать
HP 9000 V-Class Скачать руководство пользователя страница 20

6

Chapter 1

Overview

The node

The EPAC includes special hardware called the data mover for rapid
message and data movement between memory within a node. This
dedicated hardware greatly improves file I/O and networking over
software versions.

Hyperplane crossbar—routing attachment controller

The Hyperplane crossbar is comprised of four ERACs that provide an
interconnect for each processor and I/O device to memory.

Each of the four ERACs has the following buses:

EPAC Port (A, B, C, D)—Eight 32-bit, unidirectional interfaces to four
EPAC ports, four in each direction. Each port has simultaneous (input
and output) bandwidth of 960 Mbytes/sec.

EMAC Port (A, B, C, D)—Eight 32-bit, unidirectional interfaces to four
EMAC ports, four in each direction. Each port has simultaneous (input
and output) bandwidth of 960 Mbytes/sec.

Figure 2 shows how the ERACs connect to each EPAC and EMAC.

Содержание 9000 V-Class





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды