manualshive.com logo in svg

HP 9000 V-Class, Руководство оператора, Страница: 44 / 116

Поделиться
Скачать
HP 9000 V-Class Скачать руководство пользователя страница 44

30

Chapter 3

Teststation

Teststation logons

Using the mwm Root Menu

The teststation uses the Motif Window Manager (mwm) to control the X
windows on your screen. The Root Menu is mwm’s main menu. The
options on the Root Menu affect your entire display. From the Root
Menu, you can select menu items to create new windows, initiate
diagnostic tools, and perform other tasks.

To select a command from the Root Menu:

Step 1. Press and hold down any mouse button over the root window. The root

window is any part of your display that is not covered by a window. The
Root Menu appears.

Step 2. Move the mouse pointer over an option. The option becomes boxed.

Step 3. Release the mouse button to select the option.

The Root Menu options include:

• sspdsh window—Creates a spp diagnostic shell window on your

screen. This should be used by service personnel only.

• ksh window—Creates a new ksh window on your screen.

• test station console—Creates a new teststation window on your

screen.

• sppconsole menu—Creates a new sppconsole window by selecting

node 0/complex from this menu.

• shell menu—Lists several shell options for new windows including

the csh.

• diag tool menu—Lists several diag tools. This should be used by

service personnel only.

CAUTION

Do not select

do_reset

 (the first menu item) unless you are prepared to

reset the V-Class server.

• X tool menu—Lists several X tools including the load average

display and xlock (screen lock/saver).

• shuffle up—Moves the bottom window in a stack of windows to the

top.

Содержание 9000 V-Class





















































































































Отзывы:

Нет отзывов