HP 9000 V-Class, Руководство оператора

Страница: 36 / 116

22 Chapter 2
Indicators, switches, and displays
System Displays
LCD (liquid crystal display)
The LCD panel is located on the right of the operator panel, as shown in
Figure 7 on page 21. The LCD is a 20-character by 4-line liquid crystal
display as shown in Figure 8.
Figure 8 Front panel LCD
When the operator panel key switch is turned on, the LCD powers up,
but is initially blank.
Power-On Self Test (POST) takes about 20 seconds to start displaying
output to the LCD. POST is described in the HP Diagnostics Guide: S-
Class, X-Class, and V-Class Servers. The following explains the output
shown in Figure 8:
• The first row displays the serial number of the system
• The second row displays processor status
• The third row displays the revision of POST and the POST status
codes
• The forth row displays which processor is in control
While HP-UX is running, the LCD displays the status of each processor.
• The first row displays HP-UX RUN status
• The second row displays processor status
• The third row is normally blank
• The forth row is blank
IIII FIII IIII IIII
0 (0,0) SN 20ffffff
POST Rev 0.10.0.0
Monarch: PB2L