manualshive.com logo in svg

HP 9000 V-Class, Руководство оператора

Поделиться
Скачать
HP 9000 V-Class Скачать руководство пользователя страница 100

86

Chapter 7

Recovering from failures

Abnormal system shutdowns

Example

A system called appserver has 1 Gbyte of physical memory. If you were to
define dump devices for this system with a total of 256 Mbytes of space in
the kernel file and then define an additional 768 Mbytes of disk space in
the

/etc/fstab

 file, you would have enough dump space to hold the

entire memory image (a full dump).

If the crash occurs, however, before

/etc/fstab

 is processed, only the

amount of dump space already configured is available at the time of the
crash; in this example, it is 256 Mbytes of space.

Define enough dump space in the kernel configuration if it is critical to
capture every byte of memory in all instances, including the early stages
of the boot process.

NOTE

This example is presented for completeness. The actual amount of time
between the point where kernel dump devices are activated and the
point where runtime dump devices are activated is very small (a few
seconds), so the window of vulnerability for this situation is practically
nonexistent.

Using a device for both paging and as a dump device

It is possible to use a specific device for both paging purposes and as a
dump device. If, however, crash dump integrity is critical, this is not
recommended.

If

savecrash

 determines that a dump device is already enabled for

paging and that paging activity has already taken place on that device, a
warning message indicates that the dump may be invalid. If a dump
device has not already been enabled for paging,

savecrash

 prevents

paging from being enabled to the device by creating the file

/etc/

savecore.LCK

.

swapon

 does not enable the device for paging if the

device is locked in

/etc/savecore.LCK

.

Systems configured with small amounts of memory and using only the
primary swap device as a dump device might not be able to preserve the
dump (copy it to the HP-UX file system area) before paging activity
destroys the data in the dump area. Larger memory systems are less
likely to need paging (swap) space during start-up and are therefore less
likely to destroy a memory dump on the primary paging device before it
can be copied.

Содержание 9000 V-Class





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды