manualshive.com logo in svg

HP 9000 V-Class, Руководство оператора

Поделиться
Скачать
HP 9000 V-Class Скачать руководство пользователя страница 102

88

Chapter 7

Recovering from failures

Abnormal system shutdowns

Partial save (savecrash -p)

If the system has plenty of dump device space but is limited in HP-UX
file system space, consider using the

-p

 option for the

savecrash

command. This option copies only those pages on dump devices that are
endangered by paging activity (i.e. pages on the devices used for both
paging and as dump devices). Pages that are on dedicated dump devices
remain there.

To configure this option into the boot process, edit the file

/etc/rc.config/savecrash

 and comment out the line that sets the

environment variable

SAVE_PART=1

.

Defining dump devices

When defining dump devices, it is important to accurately determine the
amount of space needed to hold the dump without wasting disk space. To
save a full dump, the amount of dump space needed is equal to the size of
the system’s physical memory.

For selective dumps, the size of dump space varies, depending on the
classes of memory be saved. To determine amount of space needed,
perform the following procedure:

Step 1. When the system is running with a typical workload, enter the following

command:

/sbin/crashconf -v

The following typical output appears:

Содержание 9000 V-Class





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды