manualshive.com logo in svg

HP 9000 V-Class, Руководство оператора

Поделиться
Скачать
HP 9000 V-Class Скачать руководство пользователя страница 109

Chapter 7

95

Recovering from failures

Abnormal system shutdowns

Following the dump, the system attempts to reboot.

The reboot

When dumping of physical memory pages is complete, the system
attempts to reboot (if the Autoboot is set). For information on the
Autoboot flag, see “Enabling Autoboot” on page 49.

savecrash processing

During the boot process, you can run a process called

savecrash

 that

copies (and optionally compresses) the memory image stored on the
dump devices to the HP-UX file system area.

Dual-mode devices (dump / swap)

By default,

savecrash

 performs its copy during the boot process. You

can disable this operation by editing the file:

/etc/rc.config.d/

savecrash

 and setting the

SAVECRASH

 environment variable to a value

of zero. This is generally safe to do if the dump devices are not also being
used as paging devices.

CAUTION

If using devices for both paging and dumping, do not disable savecrash
boot processing. Loss of the dumped memory image to subsequent
system paging activity can occur.

What to do after the system has rebooted?

After the system reboots, make sure that the physical memory image
dumped to the dump devices is copied to the HP-UX file system area
then you can either package and send it in for analysis or analyze it
yourself using a debugger.

NOTE

With HP-UX 11.0, it is possible to analyze a crash dump directly from
dump devices. If, however, you need to save it to tape or send it to
someone, first copy the memory image to the HP-UX file system area.

Unless you specifically disable

savecrash

 processing during reboot (see

savecrash processing), the

savecrash

 utility copies the memory image

for you during the reboot process. The default HP-UX directory for the
memory image in is

/var/adm/crash

. You can specify a different

location by editing the file

/etc/rc.config.d/savecrash

 and setting

the environment variable called

SAVECRASH_DIR

 to the name of the

directory the dumps are to be located.

Содержание 9000 V-Class





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды