
HP 85106D mm-Wave System
5-37
HP 85104A Test Set Module
Assembly Procedure
Procedure
NOTE
The assembly procedure must be followed in sequence; it is not the reverse
of the disassembly procedure.
1. Put the source block inside the top housing and insert four torx-head
screws on the outside of the top housing.
2. Connect the 90° coaxial bend to the semi-rigid cable on the top mount of
the source block.
3. Place the coupler bracket on the A13 assembly and attach it with
torx-head screws.
4. Connect the coupler/detector (A14) to the dual directional coupler (A8).
5. Using the guide pins, align the flange of the coupler/isolator assembly
with the flange of the source block. Hold the mating surfaces in contact
while engaging the first few threads of each screw (use four long
hex-head screws). Follow the standard flange connection technique as
outlined in Chapter 1, “Getting Started” and Chapter 2, “Operation” of
this manual.
NOTE
You may have to hold the opposite end of the coupler higher in order to mate
the surfaces of the isolator and source module block.
6. Once a good connection has been made at the source/coupler interface,
insert the hex-head coupler bracket screws.
7. Position the LO power divider on the source block with the input port
towards the right aide of the instrument (referenced from the front of the
instrument). Use the screw holes toward the right side of the instrument
on the source block to attach the LO power divider.
8. Attach the bottom mount to the coupler using hex-head screws.
9. Slide the rear panel/cable assembly into the grooves of the top housing.
10. Connect the cable clamp around the main interface cable and screw the
clamp to the right side of the coupler bracket.
11. Attach the module interface connector to A5.
12. Attach the ALC cable (yellow/white) to A5.
13. For V-and W-bands, attach the coupler/detector cable (W13).
14. Place a mixer clamp on each side of the housing across from the coupler
bracket side mount.
Содержание 85106D
