HP 733/800/866MHz 1GHz, Руководство администратора

Страница: 96 / 118

5 Configuring for Remote Boot
Remote Boot on Windows NT Server 4.0 (RPL)
96 English
Remote Boot on Windows NT Server 4.0 (RPL)
CAUTION Make sure your computer supports this protocol.
The installation and setting up of the remote boot service is described in the
INSTALL.HLP on-line help file provided by Windows NT Server 4.0.
The procedure below is based on the INSTALL.HLP HELP file, except that step 4
has been added for correct automatic setup of the HP Ethernet Family Adapter so
that you do not have to do the setup described in “Creating Remoteboot
Configurations for New Adapters” in the INSTALL.HLP documentation.
Installation Procedure
To install the remote boot service to boot HP Ethernet Family Adapter clients:
1 Install the remote boot service:
a Select Start, Settings, Control Panel, Network.
b If the DLC protocol isn't already installed, choose the Protocol tab in the
Network dialog box, and
Add...
to install the DLC protocol.
c Choose the Services tab in the Network dialog box, and
Add...
to install the
remote boot service. Assuming that your NT default directory is
\WINNT40
,
install it in the
\WINNT40\RPL
directory.
2 Install MS-DOS files for remote boot workstations:
a Check that the
RPL\RPLFILES
directory is shared on the remoteboot server. It
should have the share name RPLFILES.
b Copy all the MS-DOS files, including the system files
io.sys
and
msdos.sys
,
to the
RPL\RPLFILES\BINFILES\DOSxxx
directory, where xxx is the version
number (supported version are 330, 401, 500, 600, 622). The file
ibmdos.com
should be renamed as
msdos.sys
, and
ibmbio.com
as
io.sys
.
c Remove any attributes such as S, A, H from your system files.
To install Windows for remote boot workstations, refer to the relevant section of
the NT Server 4.0 online installation help.