HP 733/800/866MHz 1GHz, Руководство администратора

Страница: 74 / 118

4 Installing Other Network Drivers
NDIS 2.01 Driver with IBM Warp Connect
74 English
NDIS 2.01 Driver with IBM Warp Connect
To install the NDIS 2.01 driver under IBM Warp Connect, follow the instructions
below:
1 When you install IBM Warp Connect, you are asked whether you want to install
network support.
If you have already installed Warp Connect without network support, continue
with step 2.
If you are installing Warp Connect now, reply
Yes
to install network support, and
go directly to step 6.
2 In the OS/2 System folder, open the OS/2 Warp Connect Install/Remove folder.
3 Click on
Warp Connect Selective Install for Networking
.
4 Choose
Install the product on this workstation (local install)
.
5 Select
Easy Installation
.
6 Follow the instructions. You will be offered various network configuration options;
consult the
Warp Connect User’s Guide for information and continue
installation.
7 In the Select Network Adapter window, click on the
Other Adapter
window.
8 When asked for the file location, enter
A:\OS2
and insert the LAN Disk into the
flexible drive. Click
OK
.
9 The HP Ethernet Family Adapter driver will be shown in the Drivers Found
window. Select
Ethernet
as Type of LAN.
You should now see the HP Ethernet Family Adapter highlighted in the list of
adapters in the Select Network Adapter window.
10 Insert the Warp Connect CD-ROM. Then click
OK
.
11 Click
OK
in the Select Network Adapter window to accept the adapter.
12 Click
OK
again and then click
OK
a second time in the configuration window.