HP 733/800/866MHz 1GHz, Руководство администратора

Страница: 68 / 118

4 Installing Other Network Drivers
NDIS 2.01 Driver with DEC PATHWORKS 5.0 Client
68 English
NDIS 2.01 Driver with DEC PATHWORKS 5.0 Client
The installation procedure for a DEC PATHWORKS 5.0 client is as follows:
1 Verify that you have DOS and at least a minimal installation of Windows on your
PC.
2 Insert your Lan Manager setup diskette in your diskette drive (for example A:),
and make that drive the current drive the active drive by typing
A:
3 Run SETUP by typing
SETUP
4 Select
Configure PC
.
5 Select the drive you are installing the client from:
A:\
if you want to install it from
the diskette drive, or select
Network
if you want to install it from the DEC
PATHWORKS server.
6 Select the protocol you want to use (
netbeui
, for example).
7 In the adapter list, select
Other
, and fill in the blanks with the following
information:
Adapter Name = HP Ethernet Family Adapter with LAN Remote Power
NDIS driver path = A:\NDIS2\DOS
NDIS driver File = PCNTND.DOS
NDIS driver Name = PCNTND$
8 Then follow the SETUP program, until the
Edit PROTOCOL.INI
screen, please
verify that it contains the following information:
;------------------------------------;
; HP Ethernet Family Adapter ;
;------------------------------------;
DriverName = PCNTND$
BUSTYPE = PCI1
LED2 = 0x90
Make any changes if necessary and then save the file.
9 Follow the SETUP program for the rest of the installation, and refer to the
PATHWORKS Client Installation Guide if you have any difficulties.
The installation is now complete.