HP 733/800/866MHz 1GHz, Руководство администратора

Страница: 64 / 118

4 Installing Other Network Drivers
NDIS 2.01 Driver for Artisoft LANtastic 6.0
64 English
Installation for DOS
After pressing at the message to run the install program under DOS:
1 Some Artisoft initialization messages will appear on the screen. Press to
continue.
2 If this is the first installation, you will be prompted for
Station Name
and
Target
Directory
. Then, select
KEEP all previous LANtastic setup information
.
3 Select any additional LANtastic features you wish to install (see Artisoft
LANtastic manuals for more information). Press
to continue.
4 At Select Network Adapter, select
NDIS Support for Network Adapters
.
5 Insert the HP Ethernet Family Adapter disk into the flexible disk drive and then
press
to continue.
6 Insert the appropriate Artisoft LANtastic 6.0 disks when prompted. Press
to continue.
7 Select
OK to perform the installation
and press .
8 Information will appear on the screen. Press to continue.
9 Insert the appropriate Artisoft LANtastic 6.0 disk when prompted. Press
to continue.
10 You will see the “Installation Complete” and “Need to reboot your computer”
messages. Press
to continue. Remove the disk from the flexible disk
drive. Press to reboot.
11 During the boot sequence you will see the message:
AMD PCNet Family Ethernet Adapter
NDIS v2.01 MAC Driver, version x.xx
Drivername
Station Address
and other configuration information.
12 Next, you will see some LANtastic configuration messages.
The installation of the NDIS 2.01 driver for Artisoft LANtastic 6.0 is now
complete.