HP 733/800/866MHz 1GHz, Руководство администратора

Страница: 66 / 118

4 Installing Other Network Drivers
NDIS 2.01 Driver for Banyan VINES Client
66 English
NDIS 2.01 Driver for Banyan VINES Client
The PCnet driver may be configured to run in the Banyan VINES environment for
client-based systems only.
Installation Procedure
The steps to load the driver are as follows:
1 Compile all the files necessary for VINES and copy them, for example, in the
C:\NDIS
directory.
2 Create PROTOCOL.INI, CONFIG.SYS, and AUTOEXEC.BAT (sample files are
provided in the
BANYANS
directory of the LAN Disk).
a Modify the PROTOCOL.INI to reflect the changes necessary for the
appropriate LAN card section.
b Modify the AUTOEXEC.BAT and CONFIG.SYS to reflect changes in the
DIRECTORY of where the files are to be placed.
3 Run the VINES PCCONFIG to configure the NDIS Ethernet Driver:
a Select
Network Card Settings
. Then in the list provided, select
NDIS
Ethernet
.
b Verify that the interrupt level matches the one used by the driver (check that
the “bindings” parameter is PCNTND:
bindings = PCNTND
).
c Save and exit from PCCONFIG.
4 Restart the PC.
5 At the DOS prompt type BAN
The installation is now complete.