HP 733/800/866MHz 1GHz, Руководство администратора

Страница: 28 / 118

2 Installing Novell NetWare Drivers
ODI OS/2 Client Driver
28 English
ODI OS/2 Client Driver
An OS/2 computer gains access to NetWare servers by using the Requester for OS/2.
The Requester needs the OS/2 ODI driver to enable it to use the HP Ethernet
Family Adapter to access the LAN medium.
The OS/2 ODI driver
PCNTNW.OS2
is contained in the LAN Disk in the
\NOVELL\OS2CLNT
directory.
To install the ODI driver for OS/2, follow the instructions below:
1 Boot the computer into OS/2. Enter OS/2 into full screen mode by double-clicking
on the Command Prompts icon in the OS/2 System window and then double
clicking on the OS/2 Full Screen icon.
2 If you are installing OS/2 Requester from the NetWare Requester Disk, go to the
steps
given under “Installing OS/2 Requester from NetWare Requester Disk” on
page 28.
If you are installing OS/2 Requester from the NetWare WSOS2_1 Disk, go to the
steps
given under “Installing OS/2 Requester from NetWare WSOS2_1 Disk” on
page 29.
Installing OS/2
Requester from
NetWare Requester
Disk
To install from the NetWare Requester disk, follow the steps below:
1 Insert the NetWare Requester diskette into the drive and run the INSTALL
program. For example, if the diskette is in drive A, then type the following
commands:
A:\
INSTALL
2 Choose the
Requester on Workstation
under the Installation menu.
3 When the Select Options for CONFIG.SYS window appears, type the driver name
PCNTNW.OS2
into the field labeled
Network Interface Card driver
.
4 Select any other CONFIG.SYS options you wish to modify. When finished click on
the
Save
button.