HP 733/800/866MHz 1GHz, Руководство администратора

Страница: 39 / 118

English 39
2 Installing Novell NetWare Drivers
Parallel Transferring ODI DOS Client Driver
Parallel Transferring ODI Driver with DOS Shell
To install the ODI driver for DOS, follow the instructions below:
1 To begin the installation you require the Novell DOS Shell installation diskette
labeled 'WSGEN' and the LAN Disk.
2 Create a directory on the DOS boot drive (for example C) for the HP and NetWare
files using the following commands at the DOS prompt:
C:
MKDIR C:\NOVELL
3 Copy the DOS ODI Driver and NET.CFG File. For example, if the LAN Disk is in
Drive A use the following commands:
COPY A:\NOVELL\LAPPCLNT\PCLAPP.COM C:\NOVELL
COPY A:\NOVELL\LAPPCLNT\NET.CFG C:\NOVELL
The contents of the NET.CFG file are given below:
LINK DRIVER PCLAPP
BUSTYPE PCI1
FRAME ETHERNET_802.3
LED2 90
4 Copy the following files from the Novell installation diskette labeled “WSGEN” to
the
C:\NOVELL
directory:
LSL.COM (must be version 2.11 or later)
IPXODI.COM (must be version 2.20 or later)
NETX.EXE
These files are either in the root or the DOSODI directory on the NetWare
diskette.
5 The installation of the Parallel Transferring DOS ODI driver and NetWare client
software is complete. Refer to page 40 for information on how to start a Parallel
Transferring NetWare client.
NOTE The DOS Shell can only access a server's bindery. If you want access any enhanced
NetWare Directory Services, you should use the DOS Requester (VLM).