HP 64782 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 554

HP 64782 Скачать руководство пользователя страница 55

Starting and Exiting HP 64700 Interfaces

You can use several types of interfaces to the same emulator at the same time
to give yourself different views into the target system.

The strength of the emulator/analyzer interface is that it lets you perform the
real-time analysis measurements that are helpful when integrating hardware
and software.

The C debugger interface (which is a separate product) lets you view the
stack backtrace and high-level data structures, and it lets you use C language
expressions and macros. These features are most useful when debugging
software.

The Software Performance Analyzer interface (which is also a separate
product) lets you make measurements that can help you improve the
performance of your software.

These interfaces can operate at the same time with the same emulator.
When you perform an action in one of the interfaces, it is reflected in the
other interfaces.

Up to 10 interface windows may be started for the same emulator. Only one C
debugger interface window and one SPA window are allowed, but you can
start multiple emulator/analyzer interface windows.

The tasks associated with starting and exiting HP 64700 interfaces are
grouped into the following sections:

•

Starting the emulator/analyzer interface.

•

Opening other HP 64700 interface windows.

•

Exiting HP 64700 interfaces.

54

«
...
53
54
55
56
57
...
»

Содержание 64782











































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов