HP 64782 Скачать руководство пользователя страница 530 | Manualshive

Страница: 530 / 554

HP 64782 Скачать руководство пользователя страница 530

To update emulator firmware with "progflash"

•

Enter the

progflash -v <emul_name> <products ...>

command.

The progflash command downloads code from files on the host computer into
Flash EPROM memory in the HP 64700.

The -v option means "verbose". It causes progress status messages to be
displayed during operation.

The <emul_name> option is the logical emulator name as specified in the
/usr/hp64000/etc/64700tab.net file.

The <products> option names the products whose firmware is to be updated.

If you enter the progflash command without options, it becomes interactive.
If you don’t include the <emul_name> option, it displays the logical names in
the /usr/hp64000/etc/64700tab.net file and asks you to choose one. If you
don’t include the <products> option, it displays the products which have
firmware update files on the system and asks you to choose one. (In the
interactive mode, only one product at a time can be updated.) You can abort
the interactive progflash command by pressing <CTRL>c.

Progflash will print "Flash programming SUCCEEDED" and return 0 if it is
successful; otherwise, it will print "Flash programming FAILED" and return a
nonzero (error).

You can verify the update by displaying the firmware version information.

Installing/Updating Emulator Firmware

To update emulator firmware with "progflash"

529

«
...
528
529
530
531
532
...
»

Содержание 64782











































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов