HP 64782 Скачать руководство пользователя страница 358

Страница: 358 / 554

copy trace

This command copies the contents of the trace buffer to a file or to the
printer.

Trace information is copied in the same format as specified in the last display
trace command.

Initial values are the same as specified by the last

display trace

command.

The parameters are as follows:

from_line_number

This specifies the trace list line number from which copying will begin.

<LINE#>

Use this with from_line_number and thru_line_number to specify the starting
and ending trace list lines to be copied.

thru_line_number

Specifies the last line number of the trace list to include in the copied range.

Examples

copy trace to tlist

copy trace from_line_number 0 thru_line_number 5
to longtrac

See Also

The

display trace

and

store trace

commands.

Emulator/Analyzer Interface Commands

copy trace

357

Содержание 64782











































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 64782

Отзывы:

HP 64782, Руководство пользователя, Страница: 358 / 554

Результаты поиска

Содержание 64782

Отзывы: