HP 64782 Скачать руководство пользователя страница 388 | Manualshive

Страница: 388 / 554

HP 64782 Скачать руководство пользователя страница 388

load

This command transfers absolute files from the host computer into emulation
or target system RAM. With other parameters, the

load

command can load

emulator configuration files, trace records, trace specifications, or symbol
files.

The absolute file contains information about where the file is stored. The
memory map specifies that the locations of the file are in user (target
system) memory or emulation memory. This command also allows you to
access and display previously stored trace data, load a previously created
configuration file, and load absolute files with symbols.

Note that any file specified by <FILE> cannot be named "configuration",
"emul_mem", "user_mem", "symbols", "trace", or "trace_spec" because these
are reserved words, and are not recognized by the emulator/analyzer
interface as ordinary file names.

The absolute file is loaded into emulation memory by default.

The parameters are as follows:

configuration

This option specifies that a previously created emulation configuration file
will be loaded into the emulator. You can follow this option with a file name.
Otherwise the previously loaded configuration will be reloaded.

Emulator/Analyzer Interface Commands

load

387

«
...
386
387
388
389
390
...
»

Содержание 64782











































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов