HP 64782 Скачать руководство пользователя страница 141 | Manualshive

Страница: 141 / 554

HP 64782 Скачать руководство пользователя страница 141

Loading and Storing Absolute Files

This section describes the tasks related to loading absolute files into the
emulator and storing memory contents into absolute files. This section
shows you how to:

•

Load absolute files into memory.

•

Load absolute files without symbols.

•

Store memory contents into absolute files.

To load absolute files

•

Choose

File

→

Load

→

Executable

and use the dialog box to select

the absolute file.

•

Using the command line, enter the

load <absolute_file>

command.

You can load absolute files into emulation or target system memory.  You can
load IEEE-695 format absolute files.  You can also load HP format absolute
files.  The store memory command creates HP format absolute files.

If you wish to load only that portion of the absolute file that resides in
memory mapped as emulation RAM or ROM, use the command line’s

load emul_mem

syntax.

If you wish to load only the portion of the absolute file that resides in memory
mapped as target RAM, use the command line’s

load user_mem

syntax.

If you want both emulation and target memory to be loaded, do not specify
emul_mem or user_mem.

140

«
...
139
140
141
142
143
...
»

Содержание 64782











































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов